TH-409 Sludge Stripper

NANJING FINECHEM HOLDING CO., LTD

Specifications

Item	Index
Appearance	Colorless, slightly hazy liquid
Active content, %	30.0min
pH (as it)	6.0-8.0

Packing & Storage

Packing	200L plastic drum,IBC(1000L),customers’ requirement.
Storage	20℃, 2 years.
Shipping	Room temperature in China; may vary elsewhere

Free Quote

For samples, pricing, or more information, please call us at 0086 25 52397805 or mail to info@nj-finechem.com or fill out the following form.
We will respond to you as soon as possible.

Tel: 0086 25 52397805

Email: info@nj-finechem.com

General Information

Chemical & Physical Properties

Safety Information

Synthetic Route

Common Names	N/A
Structure	N/A
CAS　No.	N/A	Boiling Point (℃)	N/A
Molecular Weight	N/A	Melting Point (℃)	N/A
Appearance	N/A	Vapor Specific Gravity	N/A
HS Code	N/A	Flash Point (℃)	N/A
Solubility	N/A	Autoignition Temperature (℃)	N/A

	SYMPTOMS	PREVENTION	FIRST AID
Safety Phrases		N/A
RIDADR		N/A
WGK Germany		N/A
Packaging Group		N/A
Hazard Class		N/A
Inhalation	Cough. Sore throat.	Use local exhaust or breathing protection.	Fresh air, rest.
Skin	Redness. Burning sensation. Itching.	Protective gloves.	Remove contaminated clothes. Rinse and then wash skin with water and soap.
Eyes	Redness. Pain.	Wear safety goggles.	First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Ingestion	Abdominal pain. Nausea. Vomiting.	Do not eat, drink, or smoke during work. Wash hands before eating.	Rinse mouth. Induce vomiting (ONLY IN CONSCIOUS PERSONS!). Refer for medical attention.

N/A

Frequently Asked Questions

What is TH-409 Sludge Stripper?
TH-409 Sludge Stripper is composed of high-efficiency cationic surfactant, strong penetrating agent and dispersant, etc. It has broad-spectrum, high-efficiency bactericidal and algae killing capabilities, and strong slime stripping and cleaning functions.TH-409 Sludge Stripper has good dispersibility and permeability, strong penetrating power, low toxicity, and fast action. It has a good decomposing and peeling effect on the slime composed of slime, oil sludge, bacteria and algae secretions and bacteria and algae. At the same time, it also has the functions of softening and cleaning the old scale on the metal surface, inhibiting corrosion and improving the heat exchange rate of equipment. TH-409 Sludge Stripper is non-corrosive to metal, rubber, plastic, etc. It is easily soluble in water and is not affected by the hardness of water. Therefore, it is widely used in the circulating water system of various industries for slime stripping and cleaning. TH-409 Sludge Stripper can be used as bactericide and algicide in circulating water system, cleaning agent and paper preservative, etc.

The usage?
When TH-409 Sludge Stripper is used as a slime stripper, it is calculated according to the water retention. The general dosage is 100-200ppm. When there are many algae, if you want to quickly kill and strip the effect, you can increase the dosage appropriately . After adding TH-409 Sludge Stripper, when dirt appears in the circulating water due to stripping, the floating matter should be removed in time to avoid secondary deposition.
When TH-409 Sludge Stripper is used as a bactericide and algicide, the general dosage is 50-100mg/L.
Do not mix TH-409 Sludge Stripper with anionic surfactants such as PAA and HPMA, nor use it together with chlorophenols.