TH-503 Scale and Corrosion Inhibitor for Boiler
NANJING FINECHEM HOLDING CO., LTD
Specifications
Item Index
N/A
Packing & Storage
Packing 200L plastic drum,IBC(1000L),customers’ requirement
Storage 20℃, 2 years.
Shipping Room temperature in China; may vary elsewhere
Free Quote
For samples, pricing, or more information, please call us at 0086 25 52397805 or mail to info@nj-finechem.com or fill out the following form.
We will respond to you as soon as possible.

Tel: 0086 25 52397805

Email: info@nj-finechem.com

General Information
Chemical & Physical Properties
Safety Information
Synthetic Route
Common Names N/A
Structure N/A
CAS No. N/A Boiling Point (℃) N/A
Molecular Weight N/A Melting Point (℃) N/A
Appearance N/A Vapor Specific Gravity N/A
HS Code N/A Flash Point (℃) N/A
Solubility N/A Autoignition Temperature (℃) N/A
Safety Phrases N/A
RIDADR N/A
WGK Germany N/A
Packaging Group N/A
Hazard Class N/A
SYMPTOMS PREVENTION FIRST AID
Inhalation Cough. Sore throat. Use local exhaust or breathing protection. Fresh air, rest.
Skin Redness. Burning sensation. Itching. Protective gloves. Remove contaminated clothes. Rinse and then wash skin with water and soap.
Eyes Redness. Pain. Wear safety goggles. First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Ingestion Abdominal pain. Nausea. Vomiting. Do not eat, drink, or smoke during work. Wash hands before eating. Rinse mouth. Induce vomiting (ONLY IN CONSCIOUS PERSONS!). Refer for medical attention.
N/A
Frequently Asked Questions
The performance and application of TH-503?
TH-503 Scale and Corrosion Inhibitor for Boiler is a composite product composed of organic phosphonic acid and polycarboxylic acid and other polymers. It has high corrosion and scale inhibition performance, and its temperature resistance is particularly good, so it can be effectively used in furnace water treatment of low-pressure boilers. Boilers include plumbing, steam, locomotive boilers, etc. This product can also be used for corrosion inhibition and scale prevention in systems such as seawater desalination, distillation and automobile water tanks.

The instructions?
According to the ratio of adding 200g agent per ton of water, it can be added to the supplementary water of the boiler. When using it, pay attention to the sewage discharge. It is required to discharge the sewage every hour for 5-10 seconds each time. If the boiler is running with scale, the dosage of the agent can be increased. After 20 days, the furnace should be shut down, and the scale that has fallen off should be manually cleaned to prevent the dirt from clogging the pipeline, and then it should be turned into normal operation. If possible, the concentration ratio of the furnace water can be measured and controlled at about 10 times, and other parameters are adjusted according to the relevant regulations of the labor department (such as the pH of the furnace water is 10-12, etc.). The dosing water tank should be made of plastic, and the cement pool should be treated with anticorrosion, otherwise it will be easily corroded by the medicine, thus increasing the hardness of the water.
The total hardness of boiler make-up water should be controlled within 200mg/L. If the hardness is too high, lime method or other methods can be used to reduce the hardness, otherwise the scale inhibition effect of TH-503, a special corrosion and scale inhibitor for boilers, will be affected.

The package and storage?
This product is packed in plastic barrels, 25kg per barrel or according to customers's requirements. Store in a cool place, the storage period is ten months.
Leave A Message
Leave A Message ×
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.